A set of plugins.
AB_LM is a gain control that allows you to compare and match the volume levels with the sample in the FX chain (AB comparison). The plugin will be useful in mixing or mastering situations where you need to quickly determine the effect of a particular plug-in (FX) or even a complex FX chain on the sound.
AMM is a 32-channel automatic microphone mixer. It offers several advanced mixing modes and extensive controls for each channel.
CS-3301 is a console plug-in with gate, EQ, compressor, saturator and oversampling.
The CS-5501 is a multifunctional analog console emulator that provides all the tools you need to process all kinds of audio signals such as vocals and instruments. It is the successor to the highly successful CS-3301. It retains the smooth sound of the CS-3301 and provides much more flexibility in all tracking and mixing situations. Contains gate / expander, de-esser, compressor, limiter and saturator.
dEQ6 – 6 Band Stereo / MS Dynamic EQ with high quality oversampling and accurate spectrum analyzer.
The built-in compressor / expander will decrease or increase the gain over a specific frequency range.
dpMeter 4 – multi-channel meter
dpMeterXT is a plug-in and loudness measurement application, fully compliant with EBU R128, ITU-R BS.1770 / 1771, ATSC A / 85 and several other loudness level standards.
dPMeterXT supports multi-channel configuration, from 1.0 to 9.1 / 10.0, depending on your system configuration or DAW capabilities.
DynaRide is a plugin that can automatically level the audio signal, which is very useful, for example, on vocal tracks.
DynaRide is a dynamic processor that offers several control options: the detector can respond to vocals, speech and separately bass signals using a switch. The trigger time is determined by the attack knob.
DSEQ is a frequency domain dynamic processor.
can be used in all mixing and mastering situations:
- vocal dessing
- removal of resonances such as drums, guitar, vocal recordings
- elimination of digital harshness
- mix balancing
- unmasking of frequency regions
- support for pink noise when mixing / mastering
Euphonia – Euphonia is the optimal audio plugin for spectrum balancing, which automatically equalizes any audio signal based on several standard average spectral curves. These standard curves have the advantage that they work very well with most audio devices.
FinalLoud2 is a tool to help you reach your target volume for any audio material while maintaining True Peak presets. FinalLoud quickly solves a very difficult problem in audio engineering: achieving a certain volume level for any audio material while maintaining a given True Peak ceiling.
GainRider 2 is an amplifier (including a vocal one) that gives you full control over the process. Total Control – The Gainrider lets you control every aspect of the amplification process and gives you detailed visual feedback during signal processing for perfect mixing!
gEQ12 is a 12 band stereo / MS graphic equalizer with accurate spectrum analyzer and minimum / linear phase mode.
Impress v1.9.18 – wideband stereo compressor including side chain, pre-filtering and advanced oversampling. The aim of the tool was to cover a wide range of compression applications in modern mixing and mastering.
ISOL8 (free) – An advanced mixing monitoring tool. It divides the frequency range into 5 bands. These 5 bands can be turned on as a solo or individually turned off. This helps you focus on specific frequency ranges during the mixing and mastering process.
LA xLimit III is an advanced stereo wideband limiter that includes ISP detection and oversampling. It offers control over abrupt changes in sound character and adapts release curves, as well as additional limiting for better performance in ISP detection mode. The goal of the development is to cover a wide range of limiting applications in mixing and mastering in situations with a strong emphasis on low aliasing. An ideal tool to use as the latest plug-in in the mixing and mastering workflow.
mvMeter2 (free) is a multi-factor signal meter including RMS, EBUR128, VU and PPM measurements.
SLM2 – The SLM2 maximizer allows you to achieve the greatest possible sound volume with minimum sound distortion. Attack / Release offers even more sound shaping options.
ST1 is a simple tool that allows you to adjust the width and panning of a stereo audio signal. It includes a mono-to-stereo function, a stereo field enhancer, rich panning knob that includes spectral panning and a bass-focusing function. The phase and correlation meter visually controls the panning position and stereo width.
sTilt – A linear phase filter that tilts the audio spectrum around a selected center frequency